Evaporative Cooler Maintenance Guide

How to clean calcium from a swamp cooler?

The best cleaner is a simple mix of white vinegar and water. You should clean the water pan reservoir at the bottom of the cooling unit at least once a month throughout the season to prevent minerals from building up inside.

How to clean evaporative cooler pads?

If your cooling pads are intact and show no signs of mold or mildew, you can clean them instead of replacing them. To do this, remove the pad and use a vacuum cleaner to remove loose debris. Then place the pads on the ground outside and hose them off with clean water. Be sure to clean both sides.

How often should evaporative cooling be serviced?

No matter what type of evap cooling pads your system has, it is important to clean them at least once a month. Clean the evap cooler pads at least once a month. If you don’t clean them more often, they can cause bad smells

Do evaporative coolers need cleaning?

Even if your system seems to be working just fine, dirt and dust have been accumulating within the unit and ductwork that needs to be cleaned. Dirty evaporative coolers are not just bad for your health, but in some cases, a unit that is extremely clogged up can cause a house fire

Can I run vinegar through my swamp cooler?

Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up. Repeat one to two times a season or as needed.

If you are looking for Evaporative Cooler Maintennace Service providers in Los Angeles and surrounding areas, call Alturas Contractors. We will then provide you with an estimated cost depending upon the issue. However, we have made a flexible budget for our customers. Especially, when it comes to evaporative cooler repairing, so you need not to worry.